Cut-to-shape contact pad
Flat or layered parts where the material, thickness, outline, holes and adhesive or fastening route can be defined.
OEM contact components
Custom gripping pads for repeat production.
For robotics and automation OEMs developing a repeat-production contact part. Start with a photo, drawing or sample reference; geometry, backing, retention and production requirements can follow.
- Drawing or sample ledDefine the interface and revision first
- Process selected by projectCut, molded and bonded routes are reviewed—not assumed
- Repeat demand mattersQuote around initial production and annual usage
Representative concept imageNot GripVera inventory, a completed project or test evidence
A useful first inquiry
01Defined interface
02Drawing or sample
03Known workpiece
04Repeatable part number
05Production demand
Project fit
Four construction options for a defined contact part.
The correct construction depends on geometry, material behavior, mounting, production quantity and validation requirements. The feasible material and manufacturing route are confirmed during project review.
Molded contact geometry
For repeated profiles, ribs, pockets or part-contact features where tooling and production economics are justified.
Pad with metal backing
Review the elastomer, backing material, hole pattern, bond area and inspection requirement as one assembly.
Serviceable wear element
Separate the wear surface from the holder when the interface and retention method support repeat replacement.
Manufacturing route
Choose the process after the specification is clear.
GripVera does not assume that every pad should be molded. The quotation route is selected from the geometry, quantity, tolerances, material evidence and validation burden.
Cutting and machining
Candidate for flat sheet, simple profiles, holes, pockets and lower-tooling development routes.
Lamination and adhesive
Candidate when layers, pressure-sensitive adhesive or a release liner form part of the approved construction.
Molding
Candidate for repeat three-dimensional geometry after tooling, shrinkage, tolerances and quantity are reviewed.
Bonded pad and backing
Candidate when the contact material, metal backing, surface preparation and bond inspection must be controlled together.
Quote inputs
Send the details that change the manufacturing cost.
Unknown values can remain unknown at first contact. They must be resolved before a production specification or performance claim is accepted.
Minimum review pack
Part, interface, use and demand
A photo can start the conversation. For a production quotation, add a drawing revision or sample reference and the expected order pattern when available.
- 012D drawing, CAD, approved sample or clear dimensional reference
- 02Pad outline, thickness, backing and mounting interface
- 03Material family and hardness only when known or specified
- 04Handled part, contact surface, grip direction and load condition
- 05Dry, oily, wet, hot, clean or other operating environment
- 06Critical dimensions, tolerances and inspection requirements
- 07Current failure, required change and customer validation method
- 08Initial production quantity, annual demand and delivery pattern
Scope boundaries
Keep adjacent projects in the right lane.
The existing pages remain useful. This page is the repeat-production route; it does not replace worn-sample recovery or full finger geometry review.
| Project need | Best starting page | Boundary |
|---|---|---|
| Production program for a defined gripping pad or pad-and-backing assembly | This page | Drawing/sample, repeat part number and demand are central. |
| Worn, unavailable or failed pad with no reliable original drawing | Replacement gripper pads | Recover the existing interface before selecting a route. |
| Reach, interference, load position or complete finger geometry must change | Custom gripper fingers | The rigid finger body becomes part of the engineering scope. |
| Complete EOAT, robot safety function or certified collision protection | Outside current scope | GripVera does not claim complete-system or safety certification capability. |
Production-project review
Start with the contact part you need to improve.
Start with the highest-repeat contact component. GripVera will review the fit problem, available specifications and next steps toward a manufacturing quotation.
Need to recover a worn pad first?01Drawing, CAD or approved sample reference
02Machine, gripper or EOAT interface
03Workpiece, environment and required result
04Initial production quantity and annual demand
Send a project for review Direct: sales@meccamore.com